TOP GUN NO RINSE FLOOR STRIPPER

TOP GUN NO RINSE FLOOR STRIPPER

TOP GUN NO-RINSE FLOOR STRIPPER is very effective for the removal of all water and emulsion waxes, polymers, acrylics, and metal interlock finishes from composition tile, concrete, marble, and terrazzo floors WITHOUT RINSING!

Description

TOP GUN No Rinse Floor Stripper is used to remove wax and floor finishes without rinsing. Use of this stripper can save up to 50% of the time compared to normal stripping/rinsing procedures.

USE ON

  • Composition tile
  • Concrete
  • Marble
  • Terrazzo

REMOVES

  • Water and emulsion waxes
  • Polymers
  • Acrylics
  • Metal interlock finishes

DIRECTIONS

Dilute with water as follows:

  • Normal Use: 1 part to 5 parts water
  • Heavy Buildup: 1 part to 1 part water
  • Automatic Scrubber: 1 part to 10 parts water

Apply solution liberally with mop to floor. Leave surface very wet. Allow to remain 5 minutes and re-mop. Agitation with mop will loosen finish-normal scrubbing is not required. Allow another 3 minutes before picking up. Thoroughly pick-up the stripping solution with a mop, wet/dry vac, or an automatic scrubber. Use diluted stripper to touch up any finish remaining. Allow floor to dry. No rinsing is necessary if surface appears free of dust after drying. Apply selected finish to stripped floor. Always read label before using product.


Available: 5 gallon pail, 55 gallon drum

Safety Data Sheet  |  Product Data Sheet

Go to Top